Advertisement

The CAD drawings of the iPhone 12 Pro Max reveal the new design of the device

Advertisement

Published on Apr 17, 2020

Advertisement

The CAD drawings of the iPhone 12 Pro Max reveal the new design of the device

EverythingApplePro has posted a new video showing what could be the CAD drawings of the official iPhone 12 Pro Max, confirming that the new device will have a design similar to that of the iPad Pro.

The CAD confirms that the device will have flat edges and will be thinner than the iPhone 11 Pro Max, going from 8.1 mm to 7.4 mm thick.

The patterns of the iPhone usually end up on the network in the spring, since the accessories manufacturers are hurrying to prepare their production lines to have the enclosures ready for the launch of the new device.

This CAD has probably been leaked from a Foxconn factory and sold to a casemaker. The scheme seems to date back to January, and because the iPhone 12 is still in the advanced stage of the prototype, some details may change as Apple finalizes the production.

The device will be equipped with an OLED display by 6.7 inches, bigger screen, 6.5-inch found in the iPhone 11 Pro Max. Because of the new dimensions of the display, the device will be more wide and high, but the most obvious change is the difference in the thickness of the frame of the screen.

The size of the frame will be reduced to around 60% on all four sides, going from 2.5 mm to 1.5 mm. This increases the ratio of the screen-the comprehensive body of the device and the overall design should look very modern.

The current bump of the camera of the iPhone consists of a design at multiple levels, with the cameras placed above a bump smaller. This may change on the iPhone 12, as Apple is reportedly planning to remove this part to reduce the protrusion of the cameras.

The overall size of the bump will be more or less the same, but, as previously mentioned, the body will be more subtle.

Of course, even the layout of the camera will be modified to insert the new sensor of the camera: the scanner LiDAR. The layout corresponds to what we have seen previously. Each of the camera lenses will also become slightly larger in diameter, suggesting updates physical for lenses and sensors.

The CAD shows the same notch of the current iPhone, but the sources of Weinbach indicate that this detail is not finalized when it was realized the diagram. The new notch will be apparently smaller, will also change the curvature of the lines.

Finally, the lines of the antenna to the sides of the device will become thicker / wider. This is probably due to the support 5G.

What do you think of the new design of the iPhone 12 Pro Max? Let us know in the comments!

Advertisement

Advertisement

image

Hey friend

Your blog talks about The Cad Drawings Of The Iphone 12 Pro Max Reveal The New Design Of The Device? Contact Us to be indexed in the BitFeed Network