A new PC case is mainly needed when you want to upgrade your computer. When you decide to build your computer, you need to invest in a good quality case. Your choice of motherboard size or form factor will also influence your choice of PC cases.

Whether you are planning to build or buy a case, what should you pay attention to? Read the list below:

1) Motherboard Type (ATX/MATX/ITX)

The motherboard is the first thing you will need to consider. The ATX type supports a standard ATX motherboard as well as MATX and ITX ones. Meanwhile, those who want to build an ITX or MATX type PC case should look for cases with specific form factors.

2) Power Supply Unit (PSU)

You will need a PSU for powering up your gaming PC case. The best specs of any good PSU for your build are at least 500 watts and 80+ efficiency with a +12V rail. Some high-end models can even be as powerful as 1500 watts.

3) Form Factor

The form factor of a gaming PC case refers to the size and number of components mounted on it. The most popular ones are SFF (Small Form Factor), M-ATX/MATX with an average or general size for components, and ITX, with a small case.

The mini-ITX type is considered better in supporting a smaller PC case and airflow control since there are, which have a small size for components.

4) Motherboard Type

Not just a motherboard has a different type. You also have to decide whether you want an Intel or AMD one for your gaming PC case.

Choosing an Intel motherboard is better than AMD because it is more efficient in power consumption and heat control. Therefore, the choice of your motherboard type will be determined by which you want to go with.

4) Expansion Slots

One of the most important things to check in a PC case is its expansion slots. For gamers, you need to consider at least enough space for three cards. It also needs two or more PCIe riser connections for multi-GPU builds.

5) Drive Bays

All PC cases have at least one 3.5-inch drive bay to install a standard hard drive or optical drive. For gamers, you should consider buying a case with additional drive bays. A 2.5-inch bay can either be installed in place of the 3.5-inch bay or alongside it.

6) Air Cooling Support

Air cooling is the most common way to cool down your gaming PC. While liquid cooling is more efficient, it requires additional components and space to install all the piping. You should check whether or not your case has enough air-cooling support with big fans on the front panel.

7) Liquid Cooling Support

You should also check if your case supports liquid cooling. This is applicable mainly for those planning to set up water cooling or liquid nitrogen cooling rigs inside the case. Make sure you regularly clean the fluid cooler’s tubes and prevent them from clogging, which can cause leakage.

8) Front-Panel Ports

Check the front-panel ports of your case. It would help if you considered a model that has at least two USB 3.0 ports, one headphone, and a microphone jack, plus an LED power on/off button on the front for convenience. If possible, get a PC case with a built-in USB 2.0 port, too, so you can use it for older devices.

9) Case Design and Material

Most gaming PC cases are made from steel or aluminum, though some users prefer plastic ones to protect the PC well. Before buying a case, it’s best to check its design and material composition, so you’re sure that it will serve your long-term needs. 

10) Price

How much you want to invest is another major factor influencing your search for the best gaming PC case. You can get a good quality model from both local and international brands. Just be sure to check what you are getting for your money before buying anything.

11) Graphics Cards and CPU Heatsink

There are cases that support graphics cards or CPU heatsinks with a maximum height of 300mm. This means if the card or heat sink is higher than this, you can’t install it in your case. Check the maximum component height for compatibility before buying anything. 

Choosing the right gaming PC case is extremely important to build your dream rig. It should have enough space inside, provide proper airflow with large fans, and support liquid cooling for heavier components. Just make sure to check all the parts and components for compatibility before buying a case.